€21.58 – €25.87
1. Overview
The automatic cleaning feature of the robotic vacuum enables the device to clean designated areas without manual intervention. The feature uses pre-programmed schedules and intelligent navigation to optimize cleaning efficiency.
2. How to Activate Automatic Cleaning
- Ensure the robotic vacuum is fully charged and placed on a level surface.
- Press the “Auto Clean” button on the vacuum or use the mobile application to select the automatic cleaning mode.
- Set the desired cleaning schedule via the app or on the device control panel. The vacuum will automatically start cleaning at the specified time.
3. Adjusting Cleaning Preferences
- Use the mobile app to select the cleaning mode (e.g., Standard, Deep Clean, or Spot Clean).
- Adjust the suction power based on floor type (e.g., Low for hardwood, High for carpets).
4. Automatic Navigation and Obstacle Avoidance
The robotic vacuum uses sensors to navigate and avoid obstacles:
- Collision Detection: Infrared sensors prevent collisions with furniture or walls.
- Cliff Detection: Drop sensors stop the device from falling down stairs or ledges.
5. Maintenance Tips for Optimal Performance
- Empty the dustbin after every cleaning cycle.
- Check and clean the brushes weekly to prevent clogging.
- Regularly inspect the sensors and wipe them with a soft, dry cloth to ensure proper navigation.
6. Troubleshooting
If the robotic vacuum does not start automatic cleaning:
- Verify that the battery is fully charged.
- Ensure no obstacles block the charging dock’s signal.
- Check for firmware updates via the mobile application.
